Re: tr6 radiator duct

[Dave Simpson <dsimpson@ds2.ncweb.com>]

Joe Curry wrote:

> <<snip>>
>   I don't know if I would use plexiglass to fabricate this piece.  I
> used to
> build machine guards from the stuff in a previous life and my opinion
> is
> that it is too brittle to stand up to the flex you tend to get.  If
> you like
> the idea of "clear" as opposed to opaque, consider clear sheet vinyl.
> It's
> much more flexible and wont shatter the way plexi' will.
>
> Joe Curry

    Good point I was leaning towards either aluminum or PVC. You might
be able to use some of the molding techniques  for making curved shapes,
shuch as for aroung the air pump on side shields for spitfire engine
bya.  u