On Fri, 25 Sep 1998, Isaac Crow wrote:
> > > I am ready to adjust my valves on my '70 gt6+ engine. How do I tell
> > > which valves are exhaust and which are intake? My engine is at TDC, so
> > > which valves should be adjusted.
> >
> > It doesn't matter, really, as all valves are set the same. However, just
> > "eyeball" the alignment of the manifolds to the valves and you'll see
> > which is which.
>
> Andy,
> My Haynes manual shows .003- .005" for the exhaust valves, and .001 - .003"
> for the intake. I am reading the wrong specs? The manual also covers
> Vitesse.
I suspect that is clearance for the valve stems within the guides. The
rocker arm clearance should be .010 set cold.
--Andy
|