Mail Archive Search: <+from:KWS711@aol.com>

Results:

References: [ +from:KWS711@aol.com: 170 ]

Total 170 documents matching your query.

161. Rear end (score: 1): Author: KWS711@aol.com; Date: Mon, 6 Sep 1999 20:33:31 EDT; Had a noise in the rear of the car thought was a wheel bearing. Drained the gear oil and found lots of small metal particles on the magnetic plug. Question: 1) Can metel get past the inner seal of th; /html/datsun-roadsters/1999-09/msg00162.html (6,683 bytes)
162. A little help! (score: 1): Author: KWS711@aol.com; Date: Fri, 10 Sep 1999 21:11:16 EDT; Pulled the rear axles out of my 68 2000 SU to replace the wheel brgs etc. Went to pull the bearing collar off but couldn't get it to budge. Used a clam shell type puller, but even with heat, it would; /html/datsun-roadsters/1999-09/msg00291.html (6,638 bytes)
163. Thanks for the help! (score: 1): Author: KWS711@aol.com; Date: Sun, 12 Sep 1999 21:17:26 EDT; I'd like to thank everyone with their suggestions for removing rear wheel brgs and collars. I took the axles to our local Big O tire shop and they pressed them off. I appreciate all the responses I g; /html/datsun-roadsters/1999-09/msg00320.html (6,705 bytes)
164. Rear end questions (score: 1): Author: KWS711@aol.com; Date: Fri, 17 Sep 1999 23:11:18 EDT; I'm putting the axles back in after replacing the bearings, etc. and have a couple of things I need to clarify. 1) The spacers inside the inner seal have a bevel on one side. Does this go in or out?; /html/datsun-roadsters/1999-09/msg00471.html (6,892 bytes)
165. 68 or 69?? (score: 1): Author: KWS711@aol.com; Date: Fri, 17 Sep 1999 23:19:50 EDT; I also had this problem. My 68 2000 is registered as a 69, but is actually a 68. Seems it was sold in 69, so they figured it was that model year. I got personal plates saying 69 2000 before Les at C; /html/datsun-roadsters/1999-09/msg00472.html (6,466 bytes)
166. On the road again (score: 1): Author: KWS711@aol.com; Date: Sun, 19 Sep 1999 20:16:20 EDT; Installed the axles and buttoned everything up last night. Got done about 11PM, went out for a test run. The wheels didn't fall off and I was able to stop at the bottom of the hill. Back in business!; /html/datsun-roadsters/1999-09/msg00514.html (6,684 bytes)
167. Re: Brake springs (score: 1): Author: KWS711@aol.com; Date: Thu, 23 Sep 1999 23:50:50 EDT; I just finished up brakes last weekend. Mine too were on the inside. Manual outside, but as mentioned, they pull the shoes away from the backing plate. Work just fine on inside for me!! Kerry, I've g; /html/datsun-roadsters/1999-09/msg00680.html (6,721 bytes)
168. Re: Gear Oil (score: 1): Author: KWS711@aol.com; Date: Wed, 29 Sep 1999 00:06:05 EDT; Check out: http://www.brigadoon.com/~jstromgren/roadster.org/tips/wheelbearings.html Make sure you get the correct seals. My manual showed a standard seal, the ones on the car were moulded into a fla; /html/datsun-roadsters/1999-09/msg00848.html (6,978 bytes)
169. Re: Brake Lines (score: 1): Author: KWS711@aol.com; Date: Wed, 29 Sep 1999 00:14:47 EDT; A good brake and tire store can bend these and put fittings on them for you. experiance, they won't match up exactly, but you can tweek them if not perfect. Make sure the first bend is tight and shor; /html/datsun-roadsters/1999-09/msg00849.html (6,476 bytes)
170. Wheels (score: 1): Author: KWS711@aol.com; Date: Thu, 30 Sep 1999 21:20:56 EDT; Could someone tell me the width of the stock steel wheels on a 68 2000? What is the max size that will go on and fit the wheel wells at stock height? Thanks for your help!! Kim 68 2000; /html/datsun-roadsters/1999-09/msg00899.html (6,184 bytes)

Current List: 161 - 170
Page: [1] [2] [3] [4] [5] [6] [7] [8] [9]