Mail Archive Search: <+from:MKlepp4335@cs.com>

Results:

References: [ +from:MKlepp4335@cs.com: 303 ]

Total 303 documents matching your query.

221. Re: [oletrucks] vacuum advance (score: 1): Author: MKlepp4335@cs.com; Date: Fri, 9 Jun 2000 20:44:10 EDT; << Wouldn't Chevy duty want to know that they have a problem with their supplier? Did they make good on the replacements? what are the details? >> Likewise, Chevy Duty made good on the three bad VA u; /html/oletrucks/2000-06/msg00195.html (7,537 bytes)
222. [oletrucks] Photo page (score: 1): Author: MKlepp4335@cs.com; Date: Sun, 18 Jun 2000 18:44:46 EDT; Finally decided to get a few photos of my truck up on the web so the group could see them. I will soon have entire from end rebuilt and be able to road test it without the front sheet metal (in the; /html/oletrucks/2000-06/msg00445.html (6,716 bytes)
223. Re: [oletrucks] (score: 1): Author: MKlepp4335@cs.com; Date: Mon, 19 Jun 2000 20:58:25 EDT; << Last August I saw an ad on the net for a Truck Show that was all Advanced Design Series Trucks. >> It is in near Tulsa, on the south side. I'm not sure of the dates this year. I went last year and; /html/oletrucks/2000-06/msg00476.html (7,139 bytes)
224. [oletrucks] Local parts store (score: 1): Author: MKlepp4335@cs.com; Date: Thu, 22 Jun 2000 20:43:52 EDT; For those of you who are needing and wanting parts for your AD or TF trucks, don't fall into the habit of ordering from vendors without checking locally first. Many times, the local parts store (espe; /html/oletrucks/2000-06/msg00547.html (7,898 bytes)
225. Re: [oletrucks] members (score: 1): Author: MKlepp4335@cs.com; Date: Mon, 1 May 2000 12:41:01 EDT; << include there location >> I've been doing this since I joined, good idea. Mike Klepp '48 3100 Wichita Falls, TX oletrucks is devoted to Chevy and GM trucks built between 1941 and 1959; /html/oletrucks/2000-05/msg00015.html (7,886 bytes)
226. [oletrucks] List members (score: 1): Author: MKlepp4335@cs.com; Date: Tue, 2 May 2000 19:39:29 EDT; I sadly saw several members expressing their desire to get off the list as a result of Andy "whats-his-names" multiple messages they had to endure. OK, the problem is fixed, it was only a glitch in t; /html/oletrucks/2000-05/msg00074.html (8,001 bytes)
227. Re: [oletrucks] motor mounts don't fit (score: 1): Author: MKlepp4335@cs.com; Date: Thu, 4 May 2000 12:33:13 EDT; << the outside holes don't match up with the holes in the brackets. >> Maybe your brackets are slightly bent. I had a similar problem with my exchange rechromed bumpers. Some medium to heavy hammer w; /html/oletrucks/2000-05/msg00150.html (7,351 bytes)
228. Re: [oletrucks] master cylinders (score: 1): Author: MKlepp4335@cs.com; Date: Mon, 8 May 2000 19:14:51 EDT; << exchange a drum/drum master cylinder to replace the old single line type, and I would stay away from those designed to work with disc/drum ones. >> That seems right to me. I just ordered and recei; /html/oletrucks/2000-05/msg00275.html (8,458 bytes)
229. [oletrucks] OK Swap Meet (score: 1): Author: MKlepp4335@cs.com; Date: Mon, 8 May 2000 19:21:04 EDT; This weekend (12-14 May) is the spring Chickasha, Oklahoma swap meet at the Rodeo Grounds. Chickasha is about 25 miles south of Oklahoma City. Take the north exit off I-44 to get the the fairgrounds.; /html/oletrucks/2000-05/msg00277.html (6,764 bytes)
230. Re: [oletrucks] the need for speed (score: 1): Author: MKlepp4335@cs.com; Date: Tue, 9 May 2000 20:59:34 EDT; << give me some of the pros and cons of a new rear end vs. overdrive >> I have a Borg Warner 3 speed OD behind my 235 with a 3.90 positrac six lug truck rear. It gives the best of both worlds, good t; /html/oletrucks/2000-05/msg00319.html (7,816 bytes)
231. Re: [oletrucks] Gas tank relocation (score: 1): Author: MKlepp4335@cs.com; Date: Fri, 12 May 2000 12:29:32 EDT; << I've seen Jeep Cherokee tanks mounted behind the rear (between the rails) The '47 2nd series and '48s had their tanks forward of the rear axle, between the frame rails. If you can find a donor, it; /html/oletrucks/2000-05/msg00420.html (7,705 bytes)
232. Re: [oletrucks] AD Look-alike concept (score: 1): Author: MKlepp4335@cs.com; Date: Mon, 15 May 2000 12:44:00 EDT; << looks more like a '39 F**D to me...but still cool >> This thing is a fiberglass kit that bolts onto an S-10 Cab and chassis. Saw one at the Swap Meet I went to Saturday in OK. Really cool. I don't; /html/oletrucks/2000-05/msg00473.html (7,243 bytes)
233. Re: [oletrucks] A.D. Axle Seals (score: 1): Author: MKlepp4335@cs.com; Date: Tue, 16 May 2000 12:33:52 EDT; << Is it possible to replace the seals without removing the axles? >> No, George, the axles must be pulled to remove and install the seals. Not a big job, just messy. Jack up both sides of rear and r; /html/oletrucks/2000-05/msg00499.html (7,661 bytes)
234. Re: [oletrucks] Rear end replacement (score: 1): Author: MKlepp4335@cs.com; Date: Thu, 18 May 2000 13:32:39 EDT; << My neighbor is concerned about distorting the axle housing or the perches from the welding. I would be concerned about causing the gear oil to explode using my oxy-acetylene rig. Maybe i should MI; /html/oletrucks/2000-05/msg00572.html (7,990 bytes)
235. Re: [oletrucks] Rear end replacement (score: 1): Author: MKlepp4335@cs.com; Date: Thu, 18 May 2000 19:25:09 EDT; << Moroso spring perches are a half inch too wide >> I went to a trailer supply company locally. They had spring perches in most diameters and widths on the shelf for less than $10 a pair. Mike Klepp; /html/oletrucks/2000-05/msg00578.html (7,728 bytes)
236. [oletrucks] 216 part needed (score: 1): Author: MKlepp4335@cs.com; Date: Sun, 21 May 2000 21:15:16 EDT; I was about to finish the "disguise" of my 235 by adding a 216 valve cover when if found one of the two hold down bolts threads were damaged very badly. This is the bolt with 3/8" 16 threads on the b; /html/oletrucks/2000-05/msg00636.html (6,794 bytes)
237. Re: [oletrucks] Bumpers to Hood Fitting (score: 1): Author: MKlepp4335@cs.com; Date: Tue, 23 May 2000 12:29:53 EDT; << Does anyone have an AD truck in which the bumpers actually line up properly to the hood? >> Brad, Many hoods sit up slightly because of the worn hood hinges and bolts. The springs have enough stre; /html/oletrucks/2000-05/msg00679.html (7,274 bytes)
238. Re: [oletrucks] Drive Shaft Donors (score: 1): Author: MKlepp4335@cs.com; Date: Wed, 24 May 2000 20:01:13 EDT; << Do you all have any recommendations on either a donor drive shaft or recommendation on having one built? >> Paul, I went to the junk yard, got a shaft with the correct size u-joints to match trans; /html/oletrucks/2000-05/msg00713.html (7,530 bytes)
239. [oletrucks] My bed is back! (score: 1): Author: MKlepp4335@cs.com; Date: Sat, 27 May 2000 12:26:47 EDT; It's been a while, but my new bed sides and front panel (repo), fenders and splash aprons went to the body shop in March. I picked my shop by word of mouth and by work he has done I have seen. (He i; /html/oletrucks/2000-05/msg00753.html (7,353 bytes)
240. Re: [oletrucks] first post (score: 1): Author: MKlepp4335@cs.com; Date: Mon, 29 May 2000 19:06:39 EDT; << 49 3100 w/ '56 235 Blue Flame 140, '55 3sp+od, '58 3.90 rear >> Mark, Welcome to the list. Your truck sounds much like my '48 3100 w/ '54 235, '65 3 speed OD, '62 3.90 positrac rear. Where are you; /html/oletrucks/2000-05/msg00793.html (6,746 bytes)

Current List: 221 - 240
Page: [1] [2] [3] [4] [5] [6] [7] [8] [9] [10] [11] [12] [13] [14] [15] [16]