Search String: Display: Description: Sort:

Results:

References: [ +from:RonFineEsq@earthlink.net: 399 ]

Total 399 documents matching your query.

1. RE: painted screws (score: 1)
Author: "Ron Fine" <RonFineEsq@earthlink.net>
Date: Thu, 1 Dec 2005 18:34:49 -0800
Mine were painted original paint on my BN7. I used that plate to try to match the original Healey Ice Blue. Ron Rich, these screws are painted on my BT7 John Snyder
/html/healeys/2005-12/msg00026.html (7,477 bytes)

2. Seats BN7 (score: 1)
Author: "Ron Fine" <RonFineEsq@earthlink.net>
Date: Sat, 3 Dec 2005 10:54:57 -0800
Can anyone help me (Rich?) with some photos of the back end of the bottom seat cushion with leather seat secured to the pan? I bought Moss seat foam sets about 2 years ago on sale. Took them out of t
/html/healeys/2005-12/msg00074.html (7,057 bytes)

3. FW: Seats BN7 (score: 1)
Author: "Ron Fine" <RonFineEsq@earthlink.net>
Date: Sat, 3 Dec 2005 14:43:02 -0800
Moss only lists one foam cushion for the BN7 and those are the ones that they sent (based on the numbers on the bags). But something is not right or I am missing something about the way the foam sits
/html/healeys/2005-12/msg00079.html (7,621 bytes)

4. RE: Seats BN7 (score: 1)
Author: "Ron Fine" <RonFineEsq@earthlink.net>
Date: Sat, 3 Dec 2005 19:48:24 -0800
Thanks David. So what's the solution? Is there a supplier of the correct foam for my 61BN7 seats? Will my Moss leather seat kit fit any other foam cushions? I suppose I could still return my seat kit
/html/healeys/2005-12/msg00089.html (7,545 bytes)

5. Re: BN 7 Seats (score: 1)
Author: "Ronald A. Fine" <ronfineesq@earthlink.net>
Date: Mon, 5 Dec 2005 11:47:20 -0800 (GMT-08:00)
Thanks for your reply. Your description will be helpful. I have ordered new foam from British Car Specialists which I am assured will fit the metal pan better than the ones I got earlier from Moss. K
/html/healeys/2005-12/msg00143.html (9,003 bytes)

6. Re: Painting Gear Shift Knob (score: 1)
Author: "Ronald A. Fine" <ronfineesq@earthlink.net>
Date: Tue, 6 Dec 2005 08:52:23 -0800 (GMT-08:00)
I've had good results with white epoxy paint that is sold in hardware stores for touching up bathroom sinks or appliances. Comes in a little bottle. Recently I used a two part epoxy which was a littl
/html/healeys/2005-12/msg00176.html (8,098 bytes)

7. RE: 100 Horn Part (score: 1)
Author: "Ron Fine" <RonFineEsq@earthlink.net>
Date: Tue, 13 Dec 2005 20:04:58 -0800
Well, as long as we are talking about hooter parts, does anyone have some of the cheese head screws that hold the ring to the horn body (BSF thread 1/4" - 26)? I had to almost destroy a couple of min
/html/healeys/2005-12/msg00432.html (6,812 bytes)

8. Re: Merry Christmas ----- and, I need a part (score: 1)
Author: "Ronald A. Fine" <ronfineesq@earthlink.net>
Date: Mon, 19 Dec 2005 14:16:31 -0800 (GMT-08:00)
These thingys are available new. I just received one, I think from Moss Motors. Much cheaper than having the original replated. Ron Fine --Original Message--
/html/healeys/2005-12/msg00562.html (7,878 bytes)

9. RE: 100M on ebay (score: 1)
Author: "Ron Fine" <RonFineEsq@earthlink.net>
Date: Fri, 23 Dec 2005 10:27:37 -0800
Hope you have some insurance on it. "Hope the garage doesn't catch on fire."
/html/healeys/2005-12/msg00623.html (6,486 bytes)

10. Re: Anti-freeze (score: 1)
Author: "Ronald A. Fine" <ronfineesq@earthlink.net>
Date: Thu, 3 Nov 2005 15:58:57 -0800 (GMT-08:00)
I think they are all about the same as far as protection of the engine. I can't tell you how much to use (I live in sunny Southern California) but I do know that some are much safer to use around pet
/html/healeys/2005-11/msg00070.html (7,033 bytes)

11. Re: Replacing Rear Wheel Cylinders (score: 1)
Author: "Ronald A. Fine" <ronfineesq@earthlink.net>
Date: Fri, 4 Nov 2005 11:29:32 -0800 (GMT-08:00)
I'll add my 2 cents. I saved as many of the original parts taken off my BN7 as possible even though I knew I would replace them with new ones because sometimes it just helps to see something you neve
/html/healeys/2005-11/msg00083.html (8,205 bytes)

12. Re: Seat Slides - Used or new? Tis the question... (score: 1)
Author: "Ronald A. Fine" <ronfineesq@earthlink.net>
Date: Mon, 7 Nov 2005 12:18:29 -0800 (GMT-08:00)
Mine were rusty and needed to be completely rebuilt. Several of the screw studs were stripped or missing. After looking at the time to rebuild them and the cost for replacing the parts or having the
/html/healeys/2005-11/msg00154.html (7,380 bytes)

13. Re: Ooops! Did it again, & Cut Off Switch ques. (score: 1)
Author: "Ronald A. Fine" <ronfineesq@earthlink.net>
Date: Tue, 8 Nov 2005 10:55:11 -0800 (GMT-08:00)
As long as we are talking about the cut off switch, I have a question about its use on my BN7 where it is placed on the outside of the rear bulkhead with the knob projecting into the trunk area. It s
/html/healeys/2005-11/msg00166.html (7,844 bytes)

14. fiting gearbox cover extension panel (score: 1)
Author: "Ronald A. Fine" <ronfineesq@earthlink.net>
Date: Fri, 11 Nov 2005 13:27:14 -0800 (GMT-08:00)
Sorry to boor the list with such a mundane question, but, I am refitting the "extension panel" that goes against the firewall covering the front of the transmission and bell housing. Moss catalog sho
/html/healeys/2005-11/msg00219.html (6,920 bytes)

15. BN7 seats (score: 1)
Author: "Ron Fine" <RonFineEsq@earthlink.net>
Date: Mon, 14 Nov 2005 11:02:40 -0800
Thanks Rich. I have another question you will probably be able to answer. Is there vinyl on the edges of the bottom bracket of the seat which bolts directly to the adjusting rails on a BN7. I have Mo
/html/healeys/2005-11/msg00277.html (7,381 bytes)

16. Re: Steering Wheel (score: 1)
Author: "Ronald A. Fine" <ronfineesq@earthlink.net>
Date: Wed, 16 Nov 2005 15:28:23 -0800 (GMT-08:00)
I don't understand how KY jelly will stop water leaking. It is water soluble by design to not irratate delicate parts of the body. I strongly suggest that you use an old belt on the nut. Use a smooth
/html/healeys/2005-11/msg00381.html (7,092 bytes)

17. RE: Putting the Channels Back on the Window Glass (score: 1)
Author: "Ron Fine" <RonFineEsq@earthlink.net>
Date: Sat, 26 Nov 2005 09:55:08 -0800
Be sure you have the correct thickness of rubber glazing for your window glass. When I removed my original glass from the channels to get them re-chromed the original rubber was very thin. When I ord
/html/healeys/2005-11/msg00608.html (8,054 bytes)

18. Fitting Shut Face Finisher (score: 1)
Author: "Ron Fine" <RonFineEsq@earthlink.net>
Date: Sun, 27 Nov 2005 17:58:54 -0800
I have almost completed the interior of my BN7. I just have to fit the new Shut Face Finisher sets. The two bottom pieces seem straight forward but the vertical piece needs to be trimmed along the ou
/html/healeys/2005-11/msg00624.html (7,005 bytes)

19. My source for glass glazing rubber (score: 1)
Author: "Ron Fine" <RonFineEsq@earthlink.net>
Date: Sun, 27 Nov 2005 21:12:38 -0800
Healey Surgeons, Inc. 7211 Carroll Ave. Takoma Park, MD 20912. In response to my inquire they sent me small samples of two very thin rubber glazing strips. One had some cork mixed in and was too thin
/html/healeys/2005-11/msg00630.html (6,914 bytes)

20. RE: Fitting Shut Face Finisher (score: 1)
Author: "Ron Fine" <RonFineEsq@earthlink.net>
Date: Sun, 27 Nov 2005 21:21:25 -0800
Thanks Again, Rich. Ron, Basic rule of thumb here is to have the edge of the aluminum follow the profile of the rear fender exactly parallel but just in far enough that the screw heads for the fender
/html/healeys/2005-11/msg00631.html (7,500 bytes)


This search system is powered by Namazu