Mail Archive Search: <+subject:/^(?:^\s*(re|sv|fwd|fw)[\[\]\d]*[:>-]+\s*)*speedometer\s*$/>

Results:

References: [ +subject:/^(?:^\s*(re|sv|fwd|fw)[\[\]\d]*[:>-]+\s*)*speedometer\s*$/: 24 ]

Total 24 documents matching your query.

1. Speedometer (score: 1): Author: "Ned Smith" <smithn00@kitepilot.net>; Date: Fri, 16 Dec 2005 13:10:54 -0500; The Trip Reset shaft on my BJ8 speedometer was broken off right at the cotter pin hole. I have gotten an after-market shaft extension from Mo Ma. What is the length of broken off part? How much shaft; /html/healeys/2005-12/msg00480.html (6,374 bytes)
2. speedometer (score: 1): Author: <INSPTWO@msn.com>; Date: Wed, 12 Oct 2005 20:43:43 -0400; On a drive today, I thought my left front wheel bearing was starting to go. After hearing the loud screeching I finally determined that the bearing was not going to never never land. It was my speedo; /html/healeys/2005-10/msg00334.html (6,337 bytes)
3. speedometer (score: 1): Author: "Kurt Leslie" <kansl@net1plus.com>; Date: Mon, 1 Aug 2005 06:55:36 -0400; My speedometer was operating erratically and someone posted a suggestion of replacing a worn cable with a new one as the worn cable allows to much length at the speedo end. This repair worked quite w; /html/healeys/2005-08/msg00000.html (5,919 bytes)
4. speedometer (score: 1): Author: "Bob Yule" <autofarm@cyg.net>; Date: Sun, 31 Jul 2005 15:43:31 -0400; Recently, there was a post that I can't find, concerning the length of cable that goes into the back of the speedometer. Can someone come up with that please? Cheers.......Bob Check out our web site; /html/healeys/2005-07/msg00872.html (6,499 bytes)
5. Re: speedometer (score: 1): Author: Dave & M <rusd@velocitus.net>; Date: Sun, 31 Jul 2005 14:19:27 -0600; Hi Bob, 3/8" from face of cable flange to cable end, I believe. Dave Russell Bn2; /html/healeys/2005-07/msg00873.html (6,610 bytes)
6. Re: speedometer (score: 1): Author: "John Snyder" <helyjohn@cablespeed.com>; Date: Sun, 31 Jul 2005 18:35:05 -0700; Yes, that was my post. Per Margaret Lucas at Mo-Ma, 3/8" MAX from the end of the cable to the face of the collar. John Snyder; /html/healeys/2005-07/msg00886.html (7,003 bytes)
7. speedometer (score: 1): Author: "Dean" <dht3000@adelphia.net>; Date: Sun, 1 Aug 2004 13:30:47 -0400; I just purchased a 1965 BJ8. The speedometer constantly bounces from 10 mph to 70 mph and never stops bouncing no mater what speed I'm going. Has anyone had any experience in this area. Is it the cab; /html/healeys/2004-08/msg00006.html (7,224 bytes)
8. Re: speedometer (score: 1): Author: "Ron Fine Esq." <ronfineesq@earthlink.net>; Date: Sun, 1 Aug 2004 10:59:19 -0700; Hi Dean, I suggest you start with the cable. If the speedometer is reading something it probably is not a broken angle drive. I just replaced the cable on my MGB and fixed the same problem. Cables ar; /html/healeys/2004-08/msg00008.html (7,813 bytes)
9. Re: speedometer (score: 1): Author: "Bob Spidell" <bspidell@pacbell.net>; Date: Sun, 1 Aug 2004 11:01:12 -0700; Welcome to the List. re: "Is it the cable , the speedometer or possible the angle drive." Yes ;) Try the easy/cheap one first: remove the cable, clean it and look for any irregularities in the cable; /html/healeys/2004-08/msg00010.html (8,608 bytes)
10. Re: speedometer (score: 1): Author: "davidwjones" <davidwjones@cox.net>; Date: Sun, 1 Aug 2004 14:12:37 -0400; Try lubricating the cable before spending any money. If it still does it, the cable binding is most likely and I'd replace that 1st.; /html/healeys/2004-08/msg00011.html (7,310 bytes)
11. Re: speedometer (score: 1): Author: "James Lea" <clocks@midcoast.com>; Date: Sun, 1 Aug 2004 15:15:51 -0400; Dean. I just when through the same scenario replacing everything one by one and it turned out to be a bad angle drive. The angle drive actually works on a worm gear that has a two inch piece of cable; /html/healeys/2004-08/msg00012.html (8,133 bytes)
12. Re: speedometer (score: 1): Author: Dave & Marlene <rusd@velocitus.net>; Date: Sun, 01 Aug 2004 13:38:32 -0600; Mine bounced around the same way. I decided to try changing the cable, but on a hopeful guess, first only replaced the inner cable. No more bounce. A slight kink in the old cable was the problem. Th; /html/healeys/2004-08/msg00014.html (8,042 bytes)
13. RE: speedometer (score: 1): Author: "tom felts" <tomfelts@earthlink.net>; Date: Sun, 1 Aug 2004 16:22:27 -0400; Could be the sheath in which the cable turns that is kinked/broken/frayed. Had that happen on my E-Type - the speedo bounced 20 mph all the time. Looked at the sheath and found it was coming apart. P; /html/healeys/2004-08/msg00018.html (7,984 bytes)
14. Speedometer (score: 1): Author: jbpate@attglobal.net; Date: Sun, 01 Aug 2004 16:35:11 -0400; I've got one on the same subject. Mine will go to about 40 mph and stay there regardless of how fast I'm going above that. Then it increases higher and higher even though I am at the same speed. It w; /html/healeys/2004-08/msg00020.html (7,493 bytes)
15. Speedometer (score: 1): Author: "davidwjones" <davidwjones@cox.net>; Date: Sun, 1 Aug 2004 16:47:22 -0400; "I've got one on the same subject. Mine will go to about 40 mph and stay there regardless of how fast I'm going above that. Then it increases higher and higher even though I am at the same speed. It; /html/healeys/2004-08/msg00021.html (7,567 bytes)
16. Re: speedometer (score: 1): Author: Jerry Wall <jwbn6@iopener.net>; Date: Sun, 1 Aug 2004 13:22:24 -0500; /html/healeys/2004-08/msg00022.html (9,265 bytes)
17. Re: Speedometer (score: 1): Author: "Dean" <dht3000@adelphia.net>; Date: Sun, 1 Aug 2004 18:12:07 -0400; Ok I found my problem by process of elimination. I took the whole cable out with the sheath. Hooked it up to a drill and it ran smooth. I then hooked it up to the speedometer which I also took out an; /html/healeys/2004-08/msg00023.html (7,935 bytes)
18. speedometer (score: 1): Author: "Dean" <dht3000@adelphia.net>; Date: Tue, 3 Aug 2004 12:57:15 -0400; Ok my speedometer is working . What I found was the gear that drives the tripometer. The one that you can reset by turning the little knob had a bad spot in the plastic gear. I tried to repair it wit; /html/healeys/2004-08/msg00066.html (7,869 bytes)
19. speedometer (score: 1): Author: tld6008@mchsi.com; Date: Tue, 03 Aug 2004 17:31:08 +0000; I'm looking for information on rebuilding the seat slides. I have several and most need either the upper or lower bolts replaced. It appears to me that after removing the retaining pin on the end you; /html/healeys/2004-08/msg00067.html (7,474 bytes)
20. Speedometer (score: 1): Author: Dan Serrao <jobu1950@yahoo.com>; Date: Tue, 17 Oct 2006 19:10:47 -0700 (PDT); I have a BJ7 and the speedometer jumps around pretty good, more at higher speeds. I've replaced the cable and was wondering if I replaced the Angle Drive if that would help even more. Does anyone ha; /html/healeys/2006-10/msg00325.html (6,956 bytes)

Current List: 1 - 20
Page: [1] [2]