6pack
[Top] [All Lists]

RE: Pertronix Ignitor ignition

To: "'6pack'" <6pack@autox.team.net>
Subject: RE: Pertronix Ignitor ignition
From: Peter Zaborski <plz@shaw.ca>
Date: Fri, 13 Feb 2004 00:27:57 -0700
> From: Glenn Rierson
> Sent: Thursday, February 12, 2004 5:45 PM
>
> I did gain some valuable advice through the
> suggestion(s) that no matter whether using
> points or a Pertronix, be sure and carry a
> spare set of points, condenser, rotor and cap.

I thought I'd point out something that could be useful if one does need to
resort to the spare points due to Pertronix (or other electronic ignition
system) failure. In addition to the items listed above, it's a good idea to
have all the spare items attached to a spare distributor plate. That way,
your points are ready to just plug 'n' play so to speak, with the adjustment
already pre-done. Since the ignition will likely fail in the middle of a
dark road, possibly in the rain, it will be easier to replace the faulty
parts with the good ole points if all you have to do is swap plates.

Peter Zaborski -- CF58310 UO
(with Pertronix installed and a spare dist. plate with points pre-mounted in
the glove box)





<Prev in Thread] Current Thread [Next in Thread>