Bob, what I have so far is in the email. I did put insulation on the
top before I started. Lets wait and see what the experts have done.
Larry
"Berghult, Bob" wrote:
>
> Hi Larry,
> Don't worry about your English, the main thing is headliner. I will
> be installing 2 headliners in mine and my sons hardtops. I should get mine
> out of the paint shop this week, then starts the reassembling. I have no
> idea where to start. Have you got any ideas. Any information will be
> greatly appreciated.
>
> Thanx,
> Bob Berghult
> Series IV
> B9405637 LRX 39
>
> > -----Original Message-----
> > From: Larry Paulick [SMTP:larry.p@erols.com]
> > Sent: Monday, December 11, 2000 8:41 AM
> > To: CANISDOG@aol.com
> > Cc: alpines@autox.team.net; tigers@autox.team.net
> > Subject: Re: Headliner installation
> >
> > Paul, I have yet to do mine also, so let me know what you find.
> >
> > The information that I haves says to get the front and back
> > approximately correct, then pop rivet the front on to the top, and then
> > stretch the rear backwards. Terrible english.
> >
> > Anyway, are the sides and rear glued to the top, and yes my pockets are
> > longer that the rods, so I guess you cut them to fit.
> >
> > Let me know what you find out.
> >
> > Thanks
> >
> > Larry
> >
> > CANISDOG@aol.com wrote:
> > >
> > > I need some advise from any of you that have installed a hardtop
> > headliner.
> > > Any tricks to getting this thing tight. It seems the pockets for the
> > rods
> > > are longer than the original. Do I do the rear corners before the
> > sides?
> > > Front before the back?
> > >
> > > Thanks
> > > Paul
> > > Colorado
|