Well I used Antiseize and what I have notice
this past event is that sand will bind to the
anti seize. So I had to wipe off the inside
of the threads to remove the gritty stuff.
So maybe its just picked up dirt and stuff.
I also clean off access and add more as
necessary.
jack ~
Never had them bind though!
> From autox-owner@autox.team.net Tue Jun 27 05:07:44 2000
> Date: Tue, 27 Jun 2000 07:06:20 -0500
> From: washburn <washburn@dwave.net>
> MIME-Version: 1.0
> To: Ian <ianmcfetridge@earthlink.net>
> CC: autox@autox.team.net
> Subject: Re: Antiseize on wheel studs causes binding?
>
> Ian wrote:
> >
> > I cleaned off one of my lugs and the stud with 30W motor oil and it does not
> > bind anymore. Anyone care to comment on why antiseize can acutally cause a
> > lug to bind? I torque my lugs to 90ft-lbs. Should I use something besides
> > motor oil...maybe leave the studs dry?
> >
> Hmmmm. Never heard of this happening with anto-sieze. I clean mine
> occasionally, so maybe that's why I've never experienced this. Maybe
> just clean them every 4 or 5 changes.
>
> Pat
>
|