I noticed the same thing when I installed two Single circuit master
cylinders and the Tilton balance bar on my Spit. The petal is much harder
and requires more effort to brake than before. I previously had a dual
circuit GT6 master cylinder installed and wanted to gain a bit more control
on the front/rear balance.
Joe C.
----- Original Message -----
From: <WEmery7451@aol.com>
To: <markvaden@gmail.com>; <fot@autox.team.net>
Sent: Friday, November 02, 2007 9:34 AM
Subject: Re: [Fot] dual circuit brakes on a tr4
> I was surprised the first time out on the track with this system. I had
to
> push the brake peddle a lot harder to get the same effect.
_______________________________________________
http://www.team.net/donate.html
Fot mailing list
Fot@autox.team.net
http://autox.team.net/mailman/listinfo/fot
|