healeys
[Top] [All Lists]

RE: cooling fan

To: <healeys@autox.team.net>
Subject: RE: cooling fan
From: "BJ8Healeys" <sbyers@ec.rr.com>
Date: Wed, 18 Oct 2006 17:22:20 -0700
I think 160 is too cold, Ned, that's why I went back to a 190.  With the
cooler thermostat, on cold mornings I actually had to block part of the
radiator to get the engine up to temp.
It's something of a myth that a lower temp thermostat will help with
overheating problems.  All it really does is make it to a wide open
condition sooner, and once it's wide open it has no ability to control the
upper temp limit.

Steve Byers
HBJ8L/36666
BJ8 Registry
Havelock, NC  USA

-----Original Message-----
From: owner-healeys@autox.team.net
[mailto:owner-healeys@autox.team.net]On Behalf Of Ned Smith
Sent: Wednesday, October 18, 2006 5:28 AM
To: 'Bob Westenberg'; GSFuqua1@aol.com
Cc: healeys@autox.team.net
Subject: RE: cooling fan


Since I have rebuilt the engine and installed a Texas Cooler fan, my engine
temp has dropped 10-15 degrees. I attribute this to a very thorough chemical
cleaning of the block when it was rebored. I have a 160 degree thermostat
and it runs at 160 on cold nights. Is this too cold?

Ned Smith
BJ8
near Chattanooga, TN
N34.89, W85.47

-----Original Message-----
From: owner-healeys@autox.team.net [mailto:owner-healeys@autox.team.net] On
Behalf Of Bob Westenberg
Sent: Monday, October 16, 2006 9:11 PM
To: GSFuqua1@aol.com
Cc: healeys@autox.team.net
Subject: Re: cooling fan

Thanks Gary,
Bob Yule put a 6 blade in my BJ8, and it's suppose to pull more
air, but I still don't get full cooling in the summer.
Stop and go traffic is
still a problem. I always thought the only solution was adding additional
tubes to the core (or maybe some Water Wetter).

I don't know if Bob got the 6
blade from the Nock's or from the U.K. It seems to be very high quality, but
so was my 4 blade.

Thanks for your feedback.

Bob - BJ8
Milford, MI




<Prev in Thread] Current Thread [Next in Thread>