,
> >
> > I have a fuel leak around the gasket on the sending unit where it
mounts
> > on the fuel tank. When I replace the gasket should I use some type of
> > sealer on the gasket? Any advice on any problem that I might have on
> > repairing the leak will be appreciated..
> >
Jim,
> I'm Bud Krueger from Plymouth, Mass. I've been fighting the same leaks
> from the sending unit of my '52TD. One big problem - according to the
> folks at Loctite/Permatex, there is NO sealer for use in contact with
> gasoline.
Loctite Australia recommend RPK1 which is a 2 part putty. This is the only
thing that has worked on my TC--although I don't know if I'll be able to
ever remove the sender!
John Swanland
Melbourne Australia
|