Some confusion here, the TCSA solenoid only feeds the distributor vacuum
advance capsule. Whether it is there or not has no effect on the anti-runon
valve. The anti-runon valve has a large fresh-air intake and smaller hoses
to the charcoal canister and carb float chamber overflow port(s).
----- Original Message -----
From: "Henry D. Reynolds" <email@example.com>
To: "MonteMorris" <firstname.lastname@example.org>
Cc: "MG list" <email@example.com>
Sent: Thursday, October 09, 2003 3:14 AM
Subject: Re: ZS to HIF
> i hooked up my anti-run on valve via a T-fitting in the vacuum line to
> the distributor, but this won't work unless you eliminate or bypass the
> Transmission-Controlled Spark Advance.