...just went downstairs and looked at the old slave cyl.
I swapped out when I put in a new one on my '78.
At least on that cyl. they are the same.
...yet I do have another...that are different as you mentioned.
One tapered...one rounded.
hhhmmm......
Paul Tegler wizardz@toad.net http://www.teglerizer.com
1973 MGBGT - daily driver
http://www.teglerizer.com/mgstuff/ob_description.htm
1978 Spitfire - in superb Shape
http://www.teglerizer.com/triumphstuff/spit78.htm
1973 Round wheel Arch wire wheel Midget
http://www.teglerizer.com/midgetstuff/index.html
-----Original Message-----
From: SJagGo@aol.com <SJagGo@aol.com>
To: wizardz@maxinter.net <wizardz@maxinter.net>; davidt@opentext.com
<davidt@opentext.com>; foglew@hotmail.com <foglew@hotmail.com>
Cc: spitfires@autox.team.net <spitfires@autox.team.net>
Date: Monday, January 10, 2000 4:53 PM
Subject: Re: clutch bleeding on 1500
>Hi Paul,
>If I'm not mistaken, the seats are different for the bleed nipple and the
>fluid line. The bleed line has a special shape to accept the cone on the
>bleed nipple and the fluid line is more cup shaped.
>Bill Brockschmidt
>
|