The Facory Weber kit I got for my 1275 Sprite(s) was a 45 DCOE 13. Besides
correct jetting for the stock 1275 motor, It "differed" from some other DCOE's
only in the fuel float setting, which was relatively quite high as I recall.
I ass-u-me with the correct jetting, any 45 DCOE could be used but I don't
"know".
For advice on this, I would contact Dr. Marty
on Long Island at: www.britishstarters.com
Or, I would alternatively contact:
www.piercemanifolds.com
Dr. Marty markets the new Japanese side-
draught Webers while Pierce markets the
genuine article.
Cap'n. Bob '60 :{)
|