Hi,
I haven't been following this subject real close, so I don't know if this has
been covered yet, but I was talking with a fellow Triumph enthusiast who has a
method of removing Bondo that I thought I'd pass along to you all.
He found that using aircraft paint stripper, the type you find at your auto
paint store, works real well. He said that if you have a fairly thin layer,
say 1/8" or less, you can brush the stripper on the surface and let it soak in
a bit, then scrape it off with a putty knife. If it has been applied fairly
thick, it may require a few more applications since the stripper only soaks in
a certain amount each time.
Something to try....
Scott Helms
|