Re: FW: TR-3A dash recovering and metal clips

[Jim Bauder <jimbpps@pacbell.net>]

Carl,

I've never seen them in any of the catalogs either. My car had about
10 or 12 spaced along the lower edge of the dash. They are a half
circle about 1/2 of a dime size, I'd say and at the straight edge of
the 1/2 they have maybe a 1/16 or perhaps 1/32 of an inch between the
two halves, enough to fit two layers of vinyl and the thickness of the
dash sheet metal. I would have liked to have a couple more of them
myself.

Good luck

Jim Bauder
'58 TR3
Palo Alto, CA