Be very careful buying impact sockets for this job. Some I have seen are
too thick walled to fit
around the nut without hitting the inside perimeter
of the opening.
Joe
Randall Young wrote:
>
> Noah :
>
> If there's one in your area, check out your local Harbor Freight store.
> Mine sells single impact sockets for $1 - $2 each. Of course, you won't
be
> using them with an impact tool, but they work just fine with an extension
> and ratchet, too, at least in areas like the steering hub where there's
> plenty of clearance around the nut.
>
> Randall
>
> Freeman, Noah wrote :
> >
> > I pulled off the central hub bit, looked inside, and there is a HUGE nut
> > holding the wheel in place, the nut is much bigger than any sprocket in
my
> > set...I couldnt get any other tool in there...
///
/// triumphs@autox.team.net mailing list
/// To unsubscribe send a plain text message to majordomo@autox.team.net
/// with nothing in it but
///
/// unsubscribe triumphs
///
///
|