This prompts an interesting thought. The cover plate for the shifter ball
has two elongated positions. Is it correct to assume that the elongations
are positioned to and for the 1st gear and reverse positions, similar to a
TR6 tranny?
Alex
----- Original Message -----
From: "fred thomas" <frede.thomas2@verizon.net>
To: "Eureka Saws Co, Inc." <ambritts@ptdprolog.net>
Sent: Wednesday, July 12, 2006 08:39 PM
Subject: Re: [TR] coolant, drive train, gearshift, sequencing ?'s
> I have the exact original radio bracket and have no problems with the
> shifter, I do have a problem in the winter with the heater door opening,
so
> I just tilt the bracket forward and open either or both doors, but no
> shifter problems. "FT"qa e*/-0=
=== This list supported in part by The Vintage Triumph Register
=== http://www.vtr.org
|