Hi Paul:
You're comparing apples to oranges. TR2/3 sills are quite different from
TR4/4A (Dave Connit's). Since the TR2/3 inner sills are quite rigid on their
own, I'd install them first and solve all of the door opening - A and B post
location issues. Then install the floor pan, and the outer sill (rocker) last.
The floor pan welds to one side of the inner sill, and the rocker to the
other. No need to pre-weld any pieces together as Dave did on his TR4A. Also,
no end caps are used on the TR2/3.
Mark Macy
New Carlisle, OH
www.macysgarage.com
=== This list supported in part by The Vintage Triumph Register
=== http://www.vtr.org
|