[Top] [All Lists]

Re: [Fot] Recalcentrant Bolt!!!

To: <>, <>, <>
Subject: Re: [Fot] Recalcentrant Bolt!!!
From: "Tim Murphy" <>
Date: Mon, 26 Mar 2007 14:39:44 -0500
The Mechanical Engineer's mantra!!  Except when it's a left hand thread like 
on water pump pulley we once had to remove.  The manual was a little 
"unclear", to say the least.  We had it on there pretty tight before we got 
it off.

----- Original Message ----- 
From: <>
To: <>; <>
Cc: <>
Sent: Monday, March 26, 2007 11:49 AM
Subject: Re: [Fot] Recalcentrant Bolt!!!

> In a message dated 03/26/2007 10:32:57 AM Central Standard Time,
> writes:
>> It would be a pretty big or specialized shop to have EDM stuff. It's
>> a nut. It will come off. If worse comes to worst, use a chisel
>> against the edge of the flats. It helps if you make a nick with a
>> sharp chisel and then use a dull one to apply torque. Big Big F*&%
>> $ing Hammer (BBFH) and a bit of technique. Just be sure you're
>> loosening the nut, not tightening it.
> 'Righty Tighty...Lefty Loosey"
> Bill (Damdinger)
> **************************************
> AOL now offers free email to everyone.
> Find out more about what's free from AOL at
> _______________________________________________
> Fot mailing list
Fot mailing list

<Prev in Thread] Current Thread [Next in Thread>