[Top] [All Lists]

Re: Engine trouble

To: "Roger Bonnick" <>, <>
Subject: Re: Engine trouble
From: "Paul Hunt" <>
Date: Wed, 2 Aug 2006 09:16:52 +0100
Hi Roger - you should be able to do everything I have described with the
engine in-situ.  Someone else has said you may have to lift the engine a
little on its mounts (jack under a stout timber under the sump) to get
enough clearance to remove the front sump bolts, but after that you should
be OK.  If bores or crank are damaged then it is an engine out job.


----- Original Message ----- 

> Would this be a potential engine out or in situ job?

<Prev in Thread] Current Thread [Next in Thread>