[Top] [All Lists]

Re: [oletrucks] Dash revival

To: "Ole Trucks" <oletrucks@autox.team.net>
Subject: Re: [oletrucks] Dash revival
From: "WR Teto" <monadnoc@crystal-mtn.com>
Date: Thu, 11 May 2000 02:26:43 -0400
Duh, boy you can tell it's getting late Grant.  I knew I forgot something!  
Sorry, 'bout that...it's
3M's Acryl-green spot putty, their part number 051144-05960.  I bought a 21 oz 
tube.  Spread it on
nice a thin with a piece of 1/4" rubber for a squee-gee, and in 15 minutes you 
can sand it.  I had
tried a Bondo brand spot putty that was UV-curable, but you had to let it sit 
in the sun a while for
curing.  This stuff doesn't need sunlight.  Looks like I actually may be able 
to get a nice smooth
surface for painting.  Being as how a nice paint job is 90% preparation, I plan 
to put in plenty of
hours of prep work on the body panels and hope that will help my amateur paint 

Wally / Templeton, MA
53 3100 rod project

> So what's ot called, Wally?
> Regards,
> Grant S.

oletrucks is devoted to Chevy and GM trucks built between 1941 and 1959

<Prev in Thread] Current Thread [Next in Thread>