I had a different experience with floorpans I bought from Vickybrit
about 2 years ago. They were nice, exact duplicates made of heavy gauge
metal. I wonder if maybe they've changed suppliers since then?
JS
Bowen, Patrick A. RP2 wrote:
>
> Chris, from what I have found Spitbits has the best floorpans, they are
> exact replicas have all the hole and nuts inplace and there is no extra
> work involved, VB's are cheasy - only 1 1/2 inch deep (they should be about
> 3) the curves are off and they do not have any of the reequired holes or
> nots attached to them.
> BTW they cost the same from both people.
>
> POR-1 is a good protectant but is a nightmare to work with. very hard coat
> but it takes hour and hours to dry, your paint brush can only be used once
> and unless you pay alot extra (then only for semi-gloss) is a high gloss
> paint.
>
> No idea about rimmer, sorry.
>
> Patrick
>
> At 06:35 PM 4/18/99 -0500, Chris Pappathopoulos wrote:
> >
> >1. When ordering from Rimmer in the US do you have to pay any import
> >duties or anything special over ordering from parts houses in the
> >states?
> >
> >2. I remember reading that VB's floor boards were no good. Who has the
> >best ones?
> >
> >3. What is the best primer to use on the floorboards? I think I've read
> >that PQR-15 or something like that is very good. Who makes this?
> >
> >Thanks
> >Chris Pappathopoulos
> >
> >
> Patrick Bowen
> '79 Spitfire
> Jacksonville FL
|