1960 TR3 thermostat

["Peter Arakelian" <peterara@msn.com>]

<Why would the thermostat have a problem with 10 PSI if the 10 PSI is applied
to both sides of the thermostat?>

The problem is that the bellows, cannot withstand 10 psi, and collapses.  It
is not a question of balance.  This has been tested by a very reputable shop.

Peter Arakelian - '71 TR6, Daily Driver


===  This list supported in part by The Vintage Triumph Register
===     http://www.vtr.org