mgs
[Top] [All Lists]

Re: Under bonnet temp

To: <mgb-v8@autox.team.net>, <mgs@autox.team.net>
Subject: Re: Under bonnet temp
From: "oliver" <sumton@sbcglobal.net>
Date: Sat, 19 Feb 2005 13:39:52 -0600
hey - i'm game.  my hood has no insulation; its a 73 cbb, bone stock as far
as i know.

duct tape and a thermometer?  should i use an oven thermometer?  what range
thermometer do i need?

----- Original Message ----- 
From: "Barrie Robinson" <barrie@look.ca>
To: "James J." <m1garand@speakeasy.net>
Cc: <mgb-v8@autox.team.net>; <mgs@autox.team.net>
Sent: Saturday, February 19, 2005 3:09 PM
Subject: Re: Under bonnet temp


> James,
>
> No - no variables!   I just want the highest temp reached, - how, when and
> if, is of no concern - just the hottest.  But you have solved my problem -
> I think!  Do some cars have fibre glass bonnets?   If so then the bonnet
> temp must be below 150 deg F ?????  The real way to find out is to tape a
> thermometer under the hood and see what it registers after a long run -
and
> after standing for a few minutes!  Would anyone in a warm clime like to
> perform this experiment?
>
> At 08:36 AM 2/19/2005, you wrote:
> >Barrie,
> >    There are too many variables out there to come up with an answer to
> > that one.  Having said that, I'd suggest that you investigate a
> > reflective surface on the engine-side of the dampening material, or a
> > combo of insulating matereal atop a deadening compound.  Dynamat and
> > others do this.  Let me throw out someunrelated numbers that will be of
> > absolutely no use to you:  Engine exhaust manifolds can easily reach
> > ~1200 Deg F, if they are uncoated or unwrapped.  Resin-based Fiberglass
> > panels will soften at ~150 Deg F.  Some OEM paints blister or discolour
> > on the hoods of really hot engines.  Assume a heat gun can do the same
> > thing at ~600 Deg F.  Also, if the car is painted a dark color (or
> >colour) like BRG or black, the sun, itself, can heat the material to
> >nearly boiling (or higher).  For this reason, many fiberglass panel/body
> >folks recommend against painting their products black.
> >JJJ
> >
> >
> >Barrie Robinson wrote:
> >
> >>Can anyone tell me with authority, the maximum temperature reached under
> >>the hood - at the hood?  I need to know to check out what adhesives will
> >>stick sound deadening stuff under the bonnet (hood)
> >>
> >>Regards
> >>
> >>Barrie Robinson
> >
> >Regards
> >Barrie
> >
> >Barrie Robinson
> >(705) 721-9060




<Prev in Thread] Current Thread [Next in Thread>