[Top] [All Lists]

RE: 1980 Spitfire Head

To: spitfires@autox.team.net
Subject: RE: 1980 Spitfire Head
From: Doug Braun <doug@dougbraun.com>
Date: Tue, 9 May 2006 06:11:05 -0700 (PDT)
For a stock US '72 1300 engine, I ended up milling
from the head.  The shop thought I was crazy.  They
also charged me extra, since the milling job took
a lot longer than the usual flattening/smoothing job.

I had no obvious problems with the valve geometry,

Doug Braun
'72 Spit

===  This list supported in part by The Vintage Triumph Register
===     http://www.vtr.org

<Prev in Thread] Current Thread [Next in Thread>