Bill- A complete Sunbeam chassis, the 2 doors, bonnet, and trunk lid
dipped in solution, pressure washed and heat dryed (twice), and epoxy
primered costs about $1800-$2200 here in California. Bear in mind, one
must remove all of the undercoating before dipping. Thhis price included
epoxy primer to interiors of frame rails and such.
Chris in Trinidad
----------
> From: Bill Gullatt <bgullatt@mesahq.com>
> To: Alpine People (E-mail) <alpines@autox.team.net>; Tiger People
(E-mail) <tigers@autox.team.net>
> Subject: Stripping
> Date: Wednesday, January 06, 1999 1:20 PM
>
> I have used dipping and walnut blasting and have had wonderful results
from
> both. Depending on how far you want to go should be the deciding factor.
If
> you are doing a ground up complete disassembly then go with the dipper. I
> use Redi Strip in Evansville, Indiana (Dan Payne). They use an alkali
> solution rather than an acid. It won't come back and haunt you like acid
> dipping does. No seeping seams!.
>
> If you are just doing a repaint but want to strip use walnut blasting.
Tape
> all of your open seams with duct tape. You don't even have to remove
chrome
> or glass. Same day service and you can drive it home. (If you drove it
> there!).
>
> Both of these cost around $400 for a Mustang or Sunbeam.
>
> Bill Gullatt
> Madison, AL
>
> Redi-Strip
> 1571 Allens Ln.
> Evansville, IN 47710-3370
> Phone: (812)424-9866
> Dan Payne
>
> Hi-Tech Paint Removal
> Plastic and Media Blasting
> 1105 Forest Lake Rd.
> Tullahoma, TN 37388
> 931-649-3191
> 931-649-5661
> Wendell and Neal Towry
|