On 03-Apr-98, firstname.lastname@example.org wrote:
> Second question is much more involved. The car has about zero body
> rot, but I still have a solid gap between the door and the rear body
> panels, especially at the top. One would have to imagine a "V" to get
> a picture of the gap from bottom to top. I am told this condition can
> be corrected by replacing the worn rubber between the body and the
> chassis. I can also reduce this gap to nil by raising the rear of the
> car. Is the solution as simple as shimming via new rubber at the rear
> end, or am I looking elsewhere?
> Thanks mightily
My 71 TR6 suffers from the same door gap problem. The trailing edge of the
door fits very well at the bottom but there is a large (1/2 inch) gap at the
Does anyone know the cause and the solution?