> From: Stuart Steele [mailto:ssteele@switchsolutions.com]
> Sent: Monday, March 01, 1999 4:20 PM
>
> As I recall, this is a plastic tube with a brass compression
> fitting.
Nope, press on fitting -- no compression sleeve.
> a replacement tube-and-two-fittings assembly is
> available from any auto parts store (this is a standard
> size ), for perhaps $5.00.
Only if you consider 1/8-28 BSP a standard fitting. That is what the Smith's
oil pressure gauge takes. The TR6 block is 1/8-27 NPT -- this is a
"standard" fitting (in North America anyway).
--- Peter Zaborski CF58310UO ---
|