Hi George,
I'm surprised the spacers only add 1/4".
I believe the steel wheel studs on a TR250/TR6 are 5/8" longer than the wire
wheel studs. Is there a
smaller difference in length between the steel wheel and wire wheel studs on
the TR3A vs the
TR250/TR6 or can the spacer be less than the full 5/8" difference in stud
length?
Don Malling
Geo Hahn wrote:
> Don Malling wrote:
>
>> I've never seen spacers in use, but I wonder how noticeable the wider
>> track would be. I can imagine one could see the difference in an A/B
>> comparison, but otherwise, I wonder. Have you seen a car with spacers,
>> and the wider track is obvious and objectionable?...
>> It would be good to hear from folks that use the spacers.
>
>
>
> I have used spacers for several years with no apparent problem (so
> far). Here is a pic of the TR3A with the spacers in use:
>
> http://www.cybertrails.com/~ahwahnee/tires.JPG
>
> They add 1/4" track to each side... real hard to notice, especially with
> skinny tires (those are 165/15).
>
> Okay, the disclaimer - use at your own risk, YMMV, etc.
>
> Geo Hahn
|
