autox
[Top] [All Lists]

Re: Connector Corrosion

To: Hottvr@aol.com, racergrl@erols.com, autox@autox.team.net
Subject: Re: Connector Corrosion
From: Mdmtrsport@aol.com
Date: Wed, 25 Aug 1999 06:53:27 EDT
In a message dated 08/24/1999 9:48:49 PM Eastern Daylight Time, 
Hottvr@aol.com writes:

<< dielectric 
 grease # >>

I don't like the dieelectric grease because it will attract dirt. Which 
causes a short. Stay after the connector with wd40 before and after each use. 
If not used at all during the winter, wrap the connector in a small sandwich 
bag and seal tight with ty-wrap or tape/.

Mike Dickerson

<Prev in Thread] Current Thread [Next in Thread>