This question may show my stupidity.... so what....
Why do they put that loop in there? Is it there just for mechanical
reasons, so that you can pull on the line and the loop acts like a spring?
Dave C
----------
From: Joe Curry [SMTP:spitlist@gte.net]
Sent: Wednesday, February 10, 1999 1:21 PM
To: Jay Heaman
Cc: Craig Smith; spitfires@autox.team.net
Subject: Re: Bleeding the Clutch
Jay,
WHile that method may work on most cars, the Spits typically have a
loop
in the clutch line and this creates a barrier to gravity bleeding.
Air
bubbles become trapped in the loop and it is difficult to purge them
even with pumping.
Joe
Jay Heaman wrote:
>
> After reading all these horror stories about clutch and brake
bleeding, I
> dropped by a local garage, and asked one of the older mechanics
what he
> thought about bleeding a clutch system. He claims that he seldom
pumps
> during the bleeding process, and normally uses simple gravity to
purge air.
> Apparently he fills the master, leaves the cap off, and cracks
open the
> bleed screw...and allows mother nature to complete the rest...any
comments?
> Regards,
--
"If you can't excel with talent, triumph with effort."
-- Dave Weinbaum in National Enquirer
|