Re: Fulcrum pin removal - clueless as usual

["Brad Fornal" <tequila.brad@gmail.com>]

About a 3 hour job if you can get your bushing bolts out easily. They
sometimes will rust inside the metal sleeve in the rubber bushing
remains. THEN the cussing starts..........

On 11/3/06, Billy Zoom <billyzoom@billyzoom.com> wrote:
> 1. remove old A-arms
> 2. exchange for rebuilt A-arms
> 3. install rebuilt A-arms
> 4. go for a drive
>
> While you're at it, send Peter the spindles and have him install and ream
> the king pin bushings.
> BZ
>
-- 
www.myspace.com/tequilabrad