[Top] [All Lists]

RE: Head Sealing Problem?

To: "'Jack W. Drews'" <>,
Subject: RE: Head Sealing Problem?
From: Bill Babcock <>
Date: Wed, 26 Feb 2003 14:23:06 -0800
Hear, Hear.  Basically the stock radiator or any faithful copy of it uses
ancient radiator technology (thick, single pass). 

-----Original Message-----
From: Jack W. Drews [] 
Sent: Wednesday, February 26, 2003 1:45 PM
To: Larry Young;
Subject: Re: Head Sealing Problem?

At 11:04 AM 2/26/03 -0600, Larry Young wrote:
>I'm trying to figure out what's going on with my TR3 engine.  Ever 
>since I rebuilt the engine, I've had a problem with it blowing water 
>out into the overflow bottle....... Larry Young

I have had actual failures of the block (several cracked between rear stud

and water cavity) (repairable by metal stitching, by the way) and head 
gaskets of course, including one that would leak only at race speeds.

My car used to always run over 200 deg. Made me nervous. Here's what I

different temp gauges - no help
water wetter - no help
various sizes of restrictors and thermostats - no help
blocked off bypass -- no help
electric fan -- some help on grid, in paddock, etc

Then I bought a $189.95 stock car style aluminum radiator. I mounted it to

the original mounts. It now cools so cool that I have to run a thermostat,

and the oil now is always below 180 deg so I'm going to remove the oil 
cooler this year in the interest of weight reduction. Oh, yeah -- I put a 
brass plug in the bypass circuit and drilled a 1/4" hole in it for 
circulation at low temps, and I retained the electric fan for use on the 
grid in July.

uncle jack

<Prev in Thread] Current Thread [Next in Thread>