On Jul 30, 1:52pm, ArthurK101@aol.com wrote:
> BTW, there is no room for a wrench to grip the heads of the shock mounting
> bolts, and I ended up jamming the heads with a long screwdriver to tighten
> the nuts. Is there some trick or special tool for this job?
I've got a special socket just for that job; I took a Snap-On
deep socket and turned it down in a lathe until it fit between
the shock and the bolt head. I know of other folks who've replaced
those bolts with socket head bolts, instead.
John Lye
rjl6n@virginia.EDU
http://avery.med.virginia.edu/~rjl6n/homepage.htm
|